De Marinis FIBROCER ceramic mineral fibre insulation 60 cm high

De Marinis FIBROCER is a flexible ceramic mineral fibre insulation material designed for thermal insulation of chimneys, flue pipes and compatible components.

The material has a fixed height of 60 cm and is sold per linear metre.

Therefore:

• 1 unit = 1 metre length × 0.60 m height;
• 2 units = 2 metres length × 0.60 m height;
• 5 units = 5 metres length × 0.60 m height.

Each unit therefore corresponds to approximately 0.60 m² of insulation material.

FIBROCER is specified as heat resistant up to 1000°C.

Main features

• Manufacturer: De Marinis
• Product family: FIBROCER
• Reference: FIBROCERS
• Type: flexible flue insulation
• Material: ceramic mineral fibre
• Aluminium facing: no
• Height: 60 cm
• Sales unit: linear metre
• Size per unit: 1.00 × 0.60 m
• Nominal area per unit: 0.60 m²
• Heat resistance: up to 1000°C

How the product is sold

FIBROCER is sold per linear metre with a fixed height of 60 cm.

Ordering information: quantity 1 corresponds to 1 linear metre of insulation, 60 cm high. Increasing the quantity increases the supplied length while the height remains fixed at 60 cm.

Applications

Its flexible construction allows FIBROCER to be cut and shaped around:

• flue pipes;
• elbows;
• tees and fittings;
• connections;
• irregularly shaped components;
• custom insulation applications.

High-temperature ceramic mineral fibre

FIBROCER is made from ceramic mineral fibre and is specified as heat resistant up to 1000°C.

Important: this value refers to the insulation material itself. Adding FIBROCER does not automatically alter the certified temperature class, combustible clearance or certification of the complete flue system.

FIBROCER versus FIBROCERALU

• FIBROCER: ceramic mineral fibre without aluminium facing;
• FIBROCERALU: ceramic mineral fibre with external aluminium facing.

Both are flexible insulation materials, 60 cm high and sold per linear metre. FIBROCERALU additionally features an aluminium outer facing.

FIBROCER versus COPCER

• FIBROCER: flexible insulation, 60 cm high, sold per linear metre and shaped during installation;
• COPCER: preformed cylindrical insulation section available in specific nominal diameters.

Technical data

Installation

FIBROCER can be cut and shaped according to the surface being insulated and should be installed evenly, avoiding significant gaps in the insulation.

Its use must be compatible with flue-gas temperature, flue construction and the overall chimney design.

For wall and floor penetrations, technical shafts or installations close to combustible materials, always follow the certification and installation requirements of the complete flue system.