Cadel Atena Plus 12 is a 12 kW ductable pellet stove with independent dual hot-air ducting and ZoneControl technology for different temperature settings in each heated room. Front ventilation heats the main room, while Flexit provides greater installation flexibility. Integrated Wi-Fi and Bluetooth allow programming through the Easy Connect Plus app. A+ energy class.
TRUSTED EXPERIENCE SINCE 1913Over 100 years of experience in hardware, tools and technical products.
PHYSICAL STORE & CUSTOMER SUPPORTWe also have a physical store in La Loggia (Turin): real people ready to help before and after your
ORDERS PREPARED WITH CAREWe prepare every order with care
Cadel Atena Plus 12 is a 12 kW ductable pellet stove designed to provide effective multi-room heating through an advanced hot-air distribution system.
The stove features independent dual rear or top ducting, allowing heat to be distributed to different areas of the home with greater flexibility.
ZoneControl technology makes it possible to set different temperatures in each heated room through independent thermostats, improving comfort and allowing more efficient use of the heat produced.
One of the key features of Atena Plus 12 is ZoneControl technology, designed to provide more accurate control of ducted heating.
Independent thermostats make it possible to set different temperatures in the rooms served by the stove. The ducting fans can therefore be managed according to the actual heating requirements of each area.
This helps improve comfort and reduces unnecessary overheating in rooms that have already reached the desired temperature.
Cadel Atena Plus 12 features dual hot-air ducting that can be configured at the rear or at the top.
The two ducting circuits can be managed independently, making the stove particularly suitable for homes where several rooms have different heating requirements.
The hot-air duct connections have a diameter of Ø 80 mm.
In addition to the ducting system, Atena Plus 12 uses front ventilation to distribute warm air directly into the room where the stove is installed.
This configuration allows the main room and the additional ducted areas to be heated at the same time.
Flexit technology is designed to provide greater freedom when configuring the stove installation.
Rear or top ducting options make it easier to adapt the stove to the layout of the property and heating system.
Cadel Atena Plus 12 features integrated Wi-Fi and Bluetooth and can be programmed using the Easy Connect Plus app.
The main stove functions can be managed from a smartphone, including ignition, shutdown, operating schedules and desired temperature settings.
Indicative technical data refer to a heating capacity of approximately 105 m² / 342 m³.
The actual area and volume that can be heated depend on building insulation, climate zone, room height, exposure and actual heat loss. Correct stove sizing should therefore always be based on the characteristics of the property.
| Brand | Cadel |
| Model | Atena Plus 12 |
| Certificate model name | ATENA PLUS 12 T2 |
| Type | Ventilated and ductable pellet stove |
| Fuel | Pellets |
| Nominal output | 12 kW |
| Minimum output | 3.7 kW |
| Efficiency | 89 - 90% |
| Indicative heating area / volume | 105 m² / 342 m³ |
| Pellet hopper capacity | 23 kg |
| Pellet consumption | 0.85 - 2.8 kg/h |
| Indicative operating time | 8 - 27 hours |
| Flue outlet | Ø 80 mm |
| Combustion air inlet | Ø 60 mm |
| Hot-air duct outlet | Ø 80 mm |
| Width | 61 cm |
| Depth | 59 cm |
| Height | 115 cm |
| Weight | 152 kg |
| Electrical absorption | 84 W |
| Dust emissions | 15 mg/Nm³ |
| Energy class | A+ |
| Ducting | Dual, independently managed |
| Zone management | ZoneControl |
| Ventilation | Front |
| Installation technology | Flexit |
| Connectivity | Integrated Wi-Fi and Bluetooth |
| App control | Easy Connect Plus |
Cadel Atena Plus 12 uses an Ø 80 mm flue outlet, an Ø 60 mm combustion air inlet and Ø 80 mm hot-air duct connections.
The dual ducting can be configured at the rear or at the top, providing considerable freedom when adapting the stove to the heating system.
Installation must be carried out by qualified personnel in accordance with current regulations, the manufacturer's instructions and the characteristics of the chimney system.
International Shipping & Warranty
Please check product compatibility with a local installer before purchasing. For any further information, please contact our customer service. |
Data sheet
Specific References
Guide to Incentives and Deductions - Ecobonus and Thermal Account (for the Italian market only)
Download (375.95KB)Reference: CADEL.5024010
Brand: CADEL
Reference: CADEL.7023084
Brand: CADEL
Reference: CADEL.7026042
Brand: CADEL
Reference: CADEL.7022058
Brand: CADEL
Reference: CADEL.7025053
Brand: CADEL
Reference: CADEL.7026003
Brand: CADEL
Reference: CADEL.7023037
Brand: CADEL
Reference: CADEL.7022061
Brand: CADEL
Reference: CADEL.7026097
Brand: CADEL
No customer reviews for the moment.
Reviews can be placed by customers that purchased this product
Cadel Atena Plus 12 is a 12 kW ductable pellet stove with independent dual hot-air ducting and ZoneControl technology for different temperature settings in each heated room. Front ventilation heats the main room, while Flexit provides greater installation flexibility. Integrated Wi-Fi and Bluetooth allow programming through the Easy Connect Plus app. A+ energy class.
