Palazzetti Ecofire Lilibet TC 13 Pro3: 13 kW sealed ductable ceramic pellet stove

Palazzetti Ecofire Lilibet TC 13 Pro3 is a 13 kW sealed ductable pellet stove combining high heating output, elegant ceramic cladding and independent warm-air distribution to additional rooms.

The Air Pro System 3 configuration uses three independent fans: one for the main installation room and two dedicated to the rear hot-air ducts.

Why choose Palazzetti Lilibet TC 13 Pro3

• 13 kW nominal heat output.
• Minimum heat output of approximately 2.8 kW.
• CC50 sealed combustion.
• Elegant ceramic cladding.
• Rounded design.
• Total Black double-glazed door.
• Balanced Door.
• Air Pro System 3.
• Three independent fans.
• Two independent rear hot-air ducts.
• Ø80 mm duct connections.
• Up to approximately 28 metres of total linear ducting, depending on installation layout.
• Zero Speed Fan.
• Digital touch control panel.
• Daily and weekly programming.
• Optional Universal Gateway compatibility.
• T3 technology.
• Complete Burning System.
• Self Cleaning System.
• Speedy Clean.
• Quick Start.
• Star pellet-feed system.
• 18 kg pellet hopper.
• Maximum indicative burn time of approximately 28 hours.
• A+ energy class.
• Italian 5-star environmental rating.

Air Pro System 3

The Air Pro System 3 is the key feature of the Lilibet TC 13 Pro3 configuration.

The stove uses three independent fans: one for the main room and two dedicated to the rear ducting outlets.

The two hot-air connections use Ø80 mm ducts and can distribute warm air to separate rooms or zones.

Palazzetti specifies up to approximately 28 metres of total linear ducting. The actual achievable length depends on bends, terminals, pressure losses and the characteristics of the installation.

Ceramic design and Total Black glass

Lilibet TC 13 Pro3 features elegant ceramic cladding and a rounded body designed to integrate naturally into contemporary living areas.

The external aesthetic glass panel is black when the stove is off and becomes transparent when the fire is burning.

CC50 sealed combustion: what does it mean?

Lilibet TC 13 Pro3 is a CC50 certified sealed pellet stove.

CC50 means that combustion-chamber airtightness is verified at a pressure difference of up to 50 Pa according to EN 16510.

Combustion air can therefore be supplied directly from outdoors rather than being taken from the installation room.

This is particularly relevant in modern well-insulated buildings, low-energy homes and properties with controlled mechanical ventilation. Installation compatibility must always be assessed by a qualified installer.

Zero Speed Fan

The main-room fan features Zero Speed Fan.

At low and medium output levels, when operating conditions permit, forced ventilation can be completely switched off, allowing heat to be distributed mainly by natural convection and radiation.

T3 technology

Lilibet TC 13 Pro3 uses Palazzetti's T3 technology, designed for efficient heat exchange, quieter operation and simplified flue-circuit cleaning.

Self Cleaning System

The Self Cleaning System automatically cleans the pellet burn pot by periodically discharging combustion residues.

Complete Burning System

The Complete Burning System promotes more complete pellet combustion and helps minimise residual ash production.

Speedy Clean and Quick Start

The Speedy Clean system provides front access to the flue-gas circuit, simplifying routine cleaning and maintenance.

Quick Start is designed to reduce ignition time and allow the stove to reach normal operating conditions more quickly.

Performance and pellet consumption

Lilibet TC 13 Pro3 delivers a 13 kW nominal heat output and can modulate down to approximately 2.8 kW.

Current Palazzetti product data states approximately 90.5% efficiency at nominal output.

Pellet consumption ranges from approximately 0.64 to 2.99 kg/h. The hopper has a capacity of 18 kg, with a maximum indicative burn time of approximately 28 hours.

Palazzetti Ecofire Lilibet TC 13 Pro3 technical specifications

Installation and ducting

Lilibet TC 13 Pro3 uses an Ø80 mm flue outlet and can draw combustion air directly from outdoors.

Air Pro System 3 provides two rear Ø80 mm hot-air ducts, with up to approximately 28 metres of total linear ducting according to Palazzetti.

The chimney and ducting system must be correctly designed and installed by qualified personnel in accordance with current regulations and Palazzetti's technical instructions.

A+ energy class, 5-star rating and incentives

Palazzetti Ecofire Lilibet TC 13 Pro3 is rated A+ for energy efficiency and achieves the Italian 5-star environmental rating under D.M. 186.

Palazzetti lists Ecobonus, Bonus Casa and Conto Termico 3.0 among the incentives potentially applicable to qualifying installations. Eligibility depends on the type of project, the appliance being replaced and compliance with all applicable technical and administrative requirements.

For further information, see our guide to Conto Termico 3.0 and incentives for biomass heating appliances.