Palazzetti Ecofire Tiffany Air 13: 12.7 kW slim sealed ductable pellet stove

Palazzetti Ecofire Tiffany Air 13 is a 12.7 kW slim sealed pellet stove designed for homes requiring substantial heating output without the depth of a conventional pellet stove.

At only 34 cm deep, Tiffany can be installed flush against a wall and is particularly suitable for living rooms, corridors and passage areas.

One of its most distinctive features is the option to configure the stove with Air Pro System 2 or Air Pro System 3, allowing warm air to be distributed to one or two additional rooms.

Why choose Palazzetti Tiffany Air 13

• 12.7 kW maximum nominal heat output.
• Modulation down to approximately 3.4 kW.
• Only 34 cm deep.
• Flush-to-wall installation.
• Sealed combustion technology.
• CC50 – certified airtightness at 50 Pa according to EN 16510.
• MyDisplay+ with built-in Wi-Fi.
• Zero Speed Fan.
• Self Cleaning System.
• Complete Burning System.
• Speedy Clean.
• Quick Start.
• Balanced Door.
• Daily and weekly programming.
• Optional Air Pro System 2 for one ducted branch.
• Optional Air Pro System 3 for two independent ducted branches.
• Ø80 mm hot-air ducting.
• Top or rear ducting connection.
• 19 kg pellet hopper.
• Maximum indicative autonomy up to approximately 25 hours.
• A+ energy class.
• Italian 5-star environmental rating.

Only 34 cm deep

Tiffany Air 13 is designed as a genuine space-saving pellet stove.

Its depth of only 34 cm and flush-to-wall installation help preserve usable floor space even when a relatively high heating output is required.

CC50 sealed combustion: what does it mean?

Tiffany Air 13 is a CC50 certified sealed pellet stove.

CC50 indicates that combustion chamber airtightness has been tested at a pressure difference of up to 50 Pa according to EN 16510.

Combustion air can therefore be supplied directly from outdoors rather than being taken from the installation room.

This is particularly useful in modern well-insulated buildings, low-energy homes and properties with controlled mechanical ventilation.

MyDisplay+ with built-in Wi-Fi

Tiffany Air 13 features MyDisplay+, Palazzetti's graphic display with built-in Wi-Fi as standard.

The system provides intuitive control of the stove and access to compatible connected functions within the Palazzetti ecosystem.

Zero Speed Fan

The variable-speed room-air fan features Zero Speed Fan, allowing forced ventilation to be completely disabled under the operating conditions specified by Palazzetti.

Air Pro System 2

With the dedicated Pro2 kit for Tiffany, the stove can be configured with Air Pro System 2.

The system uses two independent fans: one for the installation room and one for a separate hot-air duct.

Palazzetti specifies ducting runs of up to approximately 14 linear metres with an Ø80 mm duct, subject to correct system design.

Air Pro System 3

With the dedicated Pro3 kit, Tiffany Air 13 can be configured with Air Pro System 3.

The system uses three independent fans: one for the main room and two for separate ducted branches.

Palazzetti specifies up to approximately 28 metres of straight Ø80 mm ducting in total, subject to correct installation design.

Self Cleaning System

The Self Cleaning System automatically cleans the pellet burn pot by periodically discharging combustion residues.

Complete Burning System

The Complete Burning System promotes more complete combustion and helps minimise residual ash production.

Speedy Clean

The latest-generation Speedy Clean system provides front access to the flue-gas circuit, simplifying routine maintenance.

Quick Start

Quick Start is designed to reduce pellet ignition time and allow the stove to reach operating conditions more quickly.

Pellet performance

Tiffany Air 13 delivers up to 12.7 kW nominal heat output and can modulate down to approximately 3.4 kW.

Efficiency reaches approximately 88.6% at nominal output and 91% at partial load.

Pellet consumption ranges from approximately 0.77 to 2.93 kg/h, while the hopper has a capacity of 19 kg. Maximum indicative autonomy is approximately 25 hours.

Palazzetti Ecofire Tiffany Air 13 technical specifications

Installation and chimney system

Palazzetti Tiffany Air 13 uses an Ø80 mm flue outlet and an Ø60 mm combustion-air inlet.

Palazzetti specifies a chimney draught of 12 Pa (±2 Pa).

The chimney and any hot-air ducting system must be correctly designed and installed by qualified personnel in accordance with current regulations and Palazzetti's technical instructions.