Palazzetti Ecofire Nadine TC 13: 13 kW sealed ceramic pellet stove

Palazzetti Ecofire Nadine TC 13 is a 13 kW sealed pellet stove designed for homes requiring high heating output together with refined ceramic styling and advanced Palazzetti combustion technology.

The steel structure is complemented by elegant ceramic cladding and a double-door system with a separate aesthetic outer door and technical combustion-chamber door.

Why choose Palazzetti Nadine TC 13

• 13 kW nominal heat output.
• Minimum heat output of approximately 2.8 kW.
• CC50 sealed combustion.
• Direct outdoor combustion-air intake capability.
• Steel structure with elegant ceramic cladding.
• Double-door design: aesthetic + technical door.
• Balanced Door.
• Zero Speed Fan.
• Digital touch control panel.
• Daily and weekly programming.
• Designed for optional Universal Gateway.
• T3 technology.
• Complete Burning System.
• Self Cleaning System.
• Speedy Clean.
• Quick Start.
• Star pellet-feed system.
• 18 kg pellet hopper.
• Maximum indicative burn time of approximately 28 hours.
• A+ energy class.
• Italian 5-star environmental rating.

Ceramic cladding and double-door design

Nadine TC 13 combines a steel structure with ceramic cladding, providing a balance between structural strength and refined styling.

The double-door arrangement separates the aesthetic outer panel from the technical combustion-chamber door.

CC50 sealed combustion: what does it mean?

Nadine TC 13 is a CC50 certified sealed pellet stove.

CC50 means that combustion-chamber airtightness is verified at a pressure difference of up to 50 Pa according to EN 16510.

Combustion air can therefore be supplied directly from outdoors rather than being taken from the installation room.

This is particularly relevant in modern well-insulated buildings, low-energy homes and properties with controlled mechanical ventilation. Installation compatibility must always be assessed by a qualified installer.

Zero Speed Fan

The variable-speed room fan features Zero Speed Fan.

When operating conditions permit, forced ventilation can be completely switched off, increasing acoustic comfort and allowing heat to be distributed mainly through natural convection and radiation.

T3 technology

Nadine TC 13 uses Palazzetti's T3 technology, based on four enlarged flue-gas tubes designed for efficient heat exchange and simplified cleaning.

Balanced Door

The Balanced Door system uses a self-balancing mechanism designed to help maintain correct combustion-chamber closure during temperature changes.

Self Cleaning System

The Self Cleaning System automatically cleans the pellet burn pot by periodically discharging combustion residues.

Complete Burning System

The Complete Burning System promotes more complete pellet combustion and helps reduce residual ash production.

Speedy Clean

The latest-generation Speedy Clean system provides front access to the flue-gas circuit, simplifying routine cleaning and maintenance.

Quick Start

Quick Start is designed to reduce ignition time and allow the stove to reach normal operating conditions more quickly.

Nadine TC 13 or Nadine TC 13 Pro3?

The Nadine TC 13 described on this page is the standard ventilated configuration.

Customers requiring hot-air distribution to additional rooms should choose the specific Nadine TC 13 Pro3 configuration.

The Pro3 version uses three independent fans: one for the main installation room and two for the rear Ø80 mm hot-air ducts.

The two versions use different Palazzetti firebox codes and must therefore be selected as separate configurations.

Performance and pellet consumption

Nadine TC 13 delivers a 13 kW nominal heat output and can modulate down to approximately 2.8 kW.

Palazzetti technical documentation specifies approximately 90.5% efficiency at nominal output and 90.9% at partial load.

Pellet consumption ranges from approximately 0.64 to 2.99 kg/h. The hopper has a capacity of 18 kg, providing a maximum indicative burn time of approximately 28 hours.

Palazzetti Ecofire Nadine TC 13 technical specifications

Installation and chimney system

Nadine TC 13 uses an Ø80 mm flue outlet and can draw combustion air directly from outdoors.

The chimney system must be correctly designed and installed by qualified personnel in accordance with current regulations and Palazzetti's technical instructions.

A+ energy class, 5-star rating and incentives

Palazzetti Ecofire Nadine TC 13 is rated A+ for energy efficiency and achieves the Italian 5-star environmental rating under D.M. 186.

Palazzetti documentation refers to Conto Termico 3.0, Ecobonus and Bonus Casa for qualifying biomass heating installations. Eligibility depends on the type of project, the appliance being replaced and compliance with all applicable technical and administrative requirements.

For further information, see our guide to Conto Termico 3.0 and incentives for biomass heating appliances.