100 cm De Marinis DESIGN SDT1PF wood stove pipe with flue test port
The 1000 mm De Marinis DESIGN SDT1PF straight pipe is a component of the DESIGN flue system featuring an integrated port for inserting a flue gas analysis probe.
It is designed for wood-burning stoves, fireplaces and biomass appliances and provides a dedicated point for combustion and flue gas testing procedures.
The pipe is manufactured from 2 mm carbon steel with a matt black high-temperature finish. Its robust construction and clean appearance make the DESIGN range particularly suitable for visible indoor installations.
It is available in nominal diameters Ø 120, 130, 140, 150, 160, 180 and 200 mm.
Main features
- Manufacturer: De Marinis
- Range: DESIGN
- Product family code: SDT1PF
- Product type: straight pipe with flue gas test probe port
- Nominal length: 1000 mm
- Material: carbon steel
- Steel thickness: 2 mm
- Finish: matt black
- Specific function: provision for flue gas analysis probe
- Application: flue systems for wood-burning stoves, fireplaces and biomass appliances
- Available diameters: Ø 120, 130, 140, 150, 160, 180 and 200 mm
- Temperature class: T600
- Marking: CE
- Reference standard: EN 1856-2:2009
What the DESIGN SDT1PF pipe is used for
The SDT1PF combines the function of a standard 100 cm straight flue pipe with an integrated flue gas test probe port.
The test port facilitates combustion checks and flue gas measurements by providing the technician with a dedicated sampling point without the need to create an additional opening in the pipe.
Its nominal 1000 mm length makes the component particularly suitable for straight sections of the flue connection where a flue gas sampling point is also required.
Before purchasing, select the correct diameter and check that it matches the appliance flue outlet and all other components used in the installation.
Flue gas analysis probe port
The integrated test point allows suitable measuring equipment to be inserted for combustion and flue gas analysis.
The location of the component within the flue connection must be determined according to the appliance manufacturer's instructions, measurement requirements and applicable regulations.
The presence of the test port does not replace the technical assessment required to determine the correct flue gas sampling position.
Technical data and classification
The component belongs to the DESIGN system manufactured in accordance with EN 1856-2:2009 and is designed for high-temperature biomass applications.
- Temperature class: T600
- Pressure class: N1
- Condensate resistance: D
- Corrosion resistance class: VM
- Material/thickness designation: L01200-G440
De Marinis dimensions and product codes
The table below identifies the available 1000 mm SDT1PF pipe with flue gas test port variants. All dimensions are expressed in millimetres.
Øn indicates the nominal pipe diameter, while Hu and I correspond to the dimensions shown in the technical drawing included on the product page.
| Finish | De Marinis code | Øn (mm) | Hu (mm) | I (mm) |
|---|
| Matt black | SDT1PF120 | 120 | 950 | 50 |
| Matt black | SDT1PF130 | 130 | 950 | 50 |
| Matt black | SDT1PF140 | 140 | 950 | 50 |
| Matt black | SDT1PF150 | 150 | 950 | 50 |
| Matt black | SDT1PF160 | 160 | 950 | 50 |
| Matt black | SDT1PF180 | 180 | 950 | 50 |
| Matt black | SDT1PF200 | 200 | 950 | 50 |
Technical note: for the SDT1PF pipe, Hu is 950 mm and I is 50 mm, corresponding to a nominal overall length of 1000 mm. The component also features an integrated flue gas analysis probe port. Please refer to the technical drawing included on the product page.
How to read the technical drawing
The technical drawing included on the product page allows the dimensions, configuration and test probe provision to be checked before ordering.
- Øn: nominal pipe diameter
- Hu: useful main section dimension, 950 mm
- I: joint/insertion dimension, 50 mm
- Probe port: provision for flue gas sampling and analysis
Comparing the technical drawing, dimensional table and selected diameter makes it easier to identify the exact De Marinis product code required for the installation.
DESIGN system compatibility
For correct dimensional continuity and system configuration, the use of De Marinis components from the same range and with the same nominal diameter is recommended.
Before combining components from different systems or manufacturers, their dimensional, technical and regulatory compatibility must be checked.
Installation
Pipe diameter, test probe position, flue route, number of bends, safety clearances and installation method must be determined according to the appliance, flue system and applicable regulations.
The DESIGN system is intended for indoor installation. Installation must be carried out by qualified personnel in accordance with the appliance manufacturer's instructions and applicable technical requirements.
